PFAS in Drinking Water: EPA's 2026 Proposals and What They Mean for Utilities and Labs
The EPA is keeping its 4 ppt limits for PFOA and PFOS but has proposed giving some water systems until 2031 to comply, and dropping limits...
Read articleBy Ramo Trading· · 4 min read
Industry News, updated November 2026
There is no known safe level of lead in drinking water. Lead usually enters tap water from lead service lines, solder and fixtures, and it is released when water becomes corrosive. The LCRI, finalized in October 2024, is the most significant update to US lead regulation since the original rule in 1991.
| Requirement | Before LCRI | Under LCRI |
|---|---|---|
| Lead action level | 15 µg/L | 10 µg/L |
| Copper action level | 1.3 mg/L | 1.3 mg/L (unchanged) |
| Service line inventory | Initial inventory (Oct 2024) | Baseline inventory classifying every line, due Nov 1, 2027 |
| Lead line replacement | Triggered by exceedances | Replacement plan due Nov 1, 2027, with lines generally replaced within 10 years |
| Schools and childcare | Limited | Community systems must list facilities in their area |
Every service line in the baseline inventory must be classified as one of the following:
Compliance lead and copper samples must go to a certified lab. Day-to-day corrosion control depends on fast, reliable in-house measurements of the parameters that keep lead in the pipe:
Hach DR300 PhosphateOrthophosphate inhibitor residualView product →
Hach HQ1110Field pH for corrosion controlView product →
Hach HQ430dBenchtop pH for the labView product →
Phenolphthalein IndicatorAlkalinity titrationsView product →

Electrochemical tests such as Palintest Kemio lead sensors give fast results on site. They are useful for investigating complaints, follow-up sampling after a line replacement, and outreach at schools. Use them for screening alongside certified-lab compliance results, not as a replacement for them.
Chlorine residual and water chemistry changes affect corrosion. The Hach DR300 Chlorine & pH covers two key parameters in one pocket meter. See our chlorine testing guide.
From the LCRI compliance date, November 1, 2027. Until then, the existing rules still apply.
No. Compliance samples must be analyzed by certified laboratories. Field sensors are best for screening, investigations and verification.
Typically pH, alkalinity and corrosion-inhibitor residual (often orthophosphate), monitored consistently at the treatment plant and in the distribution system. Your state's requirements and your optimal corrosion control treatment (OCCT) designation set the specifics.
Field kits, meters and reagents from Hach, Palintest and CHEMetrics, with volume pricing for utilities and contractors.
Request a QuoteRelated reading: pH Measurement Best Practices · PFAS 2026 Update · Hach DR300 Buying Guide
General summary for information only and not legal or regulatory advice. Confirm requirements with your state primacy agency.
The EPA is keeping its 4 ppt limits for PFOA and PFOS but has proposed giving some water systems until 2031 to comply, and dropping limits...
·5 min read
Read article →
Hach introduced two notable instruments in 2026: the DR4900 benchtop spectrophotometer and the NP6000sc online phosphate analyzer. Here's what's new and how they fit with the...
·3 min read
Read article →سجل الآن للحصول على تحديثات حول العروض الترويجية والقسائم.
شكرا على الاشتراك!
تم تسجيل هذا البريد الإلكتروني!
Comments (0)