M16x1 male thread to M30x1,5 female thread

M24x1,5 male thread to R1/2 female thread

Manually adjustable bypass G1 1/4 with connection for manometer, for Unichillers   Temperature range: -20°C ... 150°C, insulated   For this bypass one of the following pressure gauges must be ordered separately: Manometer 0-1 bar #64190 Manometer 0-2,5 bar #64189 Manometer 0-4 bar #54398...

- regulated, including T-piece - for Unistats with G 1 1/4 connection - Protection class IP 20 (indoor installation only) - Bypass loose (is not mounted on the unit) - Mounted in the pipework (before application), can be mounted permanently or via hose -...

M30x1,5 male thread to R1/2 female thread

M16x1 male thread to G1/2 female thread

R1/2 female thread to R1/2 female thread

R1/2 female thread to 3/4 NPT female thread

Manually adjustable bypass G3/4 with connection for manometer, for Unichiller   Temperature range: -20...150°C, insulated   For this bypass one of the following pressure gauges must be ordered separately: Manometer 0-1 bar #64190 Manometer 0-2,5 bar #64189 Manometer 0-4 bar #54398 Manometer 0-10 bar...

- regulated, including T-piece - for Unichillers with G 3/4 connection - Protection class IP 20 (indoor installation only) - Bypass loose (is not mounted on the unit) - Mounted in the pipework (before application), can be mounted permanently or via hose - max....

M30x1,5 male thread to G3/4 female thread

M16x1 male thread to G3/4 female thread

Material: HDPE with braiding Temperature range: -20...90°C Length: 200 cm Connection: G1 1/4 Max. pressure at 20°C: 6 bar Internal diameter: 32 mm

Material: HDPE with braiding Temperature range: -20...90°C Length: 150 cm Connection: G1 1/4 Max. pressure at 20°C: 6 bar Internal diameter: 32 mm

Material: HDPE with braiding Temperature range: -20...90°C Length: 100 cm Connection: G1 1/4 Max. pressure at 20°C: 6 bar Internal diameter: 32 mm

M38x1,5 female thread to M38x1,5 male thread

Flow rate measuring device to build into the temperature control fluid circuit for measurement and control of Heat Transfer Fluids flow rate. The flow rate can be displayed directly on the Pilot ONE and also be transmitted via the digital interfaces (USB, RS232, LAN...

Manually adjustable bypass M38x1,5 with connection for manometer, for Unistats   Temperature range: -20...150°C, insulated   For this bypass one of the following pressure gauges must be ordered separately: Manometer 0-1 bar #64190 Manometer 0-2,5 bar #64189 Manometer 0-4 bar #54398 Manometer 0-10 bar...

- regulated, including T-piece - for Unistats with M38x1,5 connection - Protection class IP 20 (indoor installation only) - Bypass loose (is not mounted on the unit) - Mounted in the pipework (before application), can be mounted permanently or via hose - max. differential...

External pressure sensor M38x1,5 for VPC bypass (Connection on VPC)