Analytical Instruments

For those lucky enough to have house Air, our filter assures you that your AAS is getting clean oil-less air. . This product includes the...

10 feet of Black Tygon Tubing for compressed air supply. Comes with two swagelock fittings & ferrules. For use with Buck Scientific Atomic Absorption Spectrophtometers...

10 Feet of blue tygon tubing for Nitrous Oxide gas supply. For use with Buck Scientific Atomic absorption spectrophotometers. Comes with 2 swagelock fittings. Note:...

A venting system is required to remove the combustion fumes and vapors from the flame or graphite furnace for atomic absorption instruments. Exhaust venting is...

Our hood and vent kit comes with 10' of stainless steel flexible exhaust hose, blower flange, window flange, two stainless steel hose clamps, 265 CFM...

Oil-Less Air Compressor for use with Buck Atomic Absorption Spectrophotometers - 110V 2.0 HP (Rated/Running) 15 Gallon Steel Tank 6.40 CFM @ 40 PSI Comes...

Oil-Less Air Compressor with fittings for use with Buck Atomic Absorption Spectrophotometers- 220V 2.0 HP (Rated/Running) 15 Gallon Steel Tank 6.40 CFM @ 40 PSI...

Ten feet of Red Tygon Tubing for acetylene gas supply. For use with all Buck Scientific Atomic Absorption Spectrophotometers. Tubing Comes with two brass swagelock...

Air Pressure Regulator for use with Buck Scientific Atomic Absorption Spectrophotometers. . Part Number: BS303-0263. Note: For all International Orders, the buyer will be solely...

Argon Regulator for use with Buck Scientific Atomic Absorption Graphite Furnace Spectrophotometer, and Buck Hydride Systems. . Part Number: BS303-0264Note: For all International Orders, the...

Nitrous Oxide Pressure Regulator for use with Buck Scientific Atomic Absorption Spectrophotometers. . Part Number: BS303-0204Note: For all International Orders, the buyer will be solely...

Buckanalyst Software Disc and Instrument Data CableNote: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed...

Photo Detector Hamamatsu IP-28 for Buck Mercury Analyzer. Part Number: BS290-1180Note: For all International Orders, the buyer will be solely responsible for the customs clearance,...

Quartz Windows for 400mm flow cell used in the Buck 410 Mercury Analyzer. . Part Number: BS006-6549Note: For all International Orders, the buyer will be...

EPA Method 413. 2/418/1 TPH (Used to make your own standards) Reference Standard w/ gravimetric and I. R. Photometric certification NIST/USFDA, ASTMNote: For all International...

The Model HC-404 is a self contained, fixed wavelength infrared analyzer designed for rapid accurate analysis of total petroleum hydrocarbons in water, soil and sludge...

Total Hydrocarbon Analyzer Calibration Standards in Hexane 50ml. (10, 50, 250ppm)Note: For all International Orders, the buyer will be solely responsible for the customs clearance,...

Drive Belts (5 pack) for HC-404. Part Number: 404-1032Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and...

Source lamp only (new lamp will not fit into old holder as of serial # 990). Older instruments will need 404-1041A lamp with new holder....

Nujol Oil, 2oz. . High Purity mineral oil used in the 4000 - 200cm-1 range.Note: For all International Orders, the buyer will be solely responsible...

Magnetic Film Holder (Dispersive) Aperture 10 x 20mm. Part Number: 6300Note: For all International Orders, the buyer will be solely responsible for the customs clearance,...

The Micro Spatula is a handy little tool for working with KBr pellets.Note: For all International Orders, the buyer will be solely responsible for the...

13mm Magnetic KBr Slide Holder. Part Number: 6111Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes...

Replacement Base for 13mm die set. Part Number: 6232Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and...

Replacement Plunger for 13mm die set. Part Number: 6230Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and...

Bench Wrench Kit for KBr Beta Press. P/N: 6106Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and...

Evacuable Barrel for the 6101 Evacuable KBr Beta Press. . Part Number: 6112Note: For all International Orders, the buyer will be solely responsible for the...

2mm Die Set. Part Number: 6217Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on...