Water Testing

Free vs. Total Chlorine: How to Test and Monitor Disinfection Correctly

By Ramo Trading 3 min read

Chlorine is the most widely used disinfectant in drinking water, pools, food processing and industrial water systems. To keep water safe and stay compliant, you need to know which chlorine you are measuring and choose a test method that fits your workflow.

Free, combined and total chlorine

  • Free chlorine is the chlorine available to disinfect, present as hypochlorous acid and hypochlorite. It is the most active form.
  • Combined chlorine is chlorine that has reacted with ammonia or organic nitrogen to form chloramines. It disinfects more weakly and can cause odors.
  • Total chlorine is free chlorine plus combined chlorine.

Subtract free from total and you have combined chlorine. Utilities that chloraminate on purpose often monitor monochloramine and free ammonia as well. The Hach DR300 Monochloramine/Free Ammonia and the CHEMetrics monochloramine solution pack cover those tests.

The DPD method

Most chlorine tests use DPD (N,N-diethyl-p-phenylenediamine), which turns pink in the presence of chlorine. For free chlorine you read the color quickly after adding the reagent. For total chlorine, potassium iodide is added and the result is read after a short reaction time. Following the method's timing exactly is essential.

Choosing a testing approach

CHEMetrics chlorine test kit
Visual kit: CHEMetrics K-2500
Hach DR300 chlorine pocket colorimeter
Pocket colorimeter: Hach DR300
Hach CL17sc online chlorine analyzer
Online analyzer: Hach CL17sc

Visual test kits: fast and low cost

CHEMetrics self-filling ampoule kits such as Chlorine, Free & Total (K-2500) are read against a comparator, for example the round chlorine comparator or the high-range flat comparator. For residual checks near zero, consider the ultra-low-range comparator.

Pocket colorimeters: numerical results in the field

The Hach DR300 Chlorine, Free + Total gives you a digital result in a rugged, pocket-sized meter. For pools and small systems, the DR300 Chlorine & pH covers both parameters. CHEMetrics users can choose a Single Analyte Meter and check it with the Chlorine SAM verification kit.

Online analyzers: continuous monitoring

Where chlorine must be tracked around the clock, for example at a plant's point of entry, in the distribution network or in a process line, an online analyzer is the right tool. The Hach CL17sc Colorimetric Chlorine Analyzer runs DPD chemistry automatically and sends results to your control system through a Hach sc controller. Keep it running well with the CL17sc cell cleaning kit and spare parts such as the CL17 colorimeter assembly.

Verify your results

Grab-sample checks should be compared against your online analyzer regularly. Secondary standards such as the chlorine reference standard kit help confirm that the instrument is reading correctly between calibrations.

Common sources of error

  • Delay between sampling and testing. Chlorine dissipates quickly, so test immediately.
  • Exposure to sunlight while the sample is being collected or tested.
  • Samples above the method's range. Very high chlorine can bleach the DPD color and give a falsely low reading.
  • Dirty or scratched sample cells.
  • Expired reagents.

Get the right chlorine solution

From visual kits to fully automated monitoring, Ramo Trading supplies chlorine testing products from Hach, CHEMetrics, Lovibond and other leading brands. Tell us about your application and we'll recommend the right setup.

Comments (0)

Comments are reviewed before they're published.

Related articles