Water Testing

CHEMetrics Test Kits Explained: CHEMets, Vacu-vials, Titrets and Photometers

By Ramo Trading 3 min read

CHEMetrics is known for one idea that makes water testing much simpler: the self-filling glass ampoule. Each ampoule is vacuum-sealed and contains a pre-measured reagent. You snap the tip under the sample, the ampoule fills itself, and the color develops. There is no pipetting, no powder handling and very little room for operator error.

The same basic idea comes in several formats. Knowing the difference helps you buy the right kit, refills and accessories.

1. CHEMets®: visual colorimetric tests

CHEMets ampoules are read by eye against a color standard called a comparator. They suit field checks, plant rounds and operators who need a quick, reliable answer without an instrument.

CHEMetrics K-2500 chlorine free and total test kit
CHEMetrics Chlorine, Free & Total kit
CHEMetrics round chlorine comparator
Round chlorine comparator
  • Round comparators hold a ring of color standards. You compare the ampoule against each one.
  • Flat comparators are used for lower ranges, where you look down through the ampoule for better sensitivity.

Ramo Trading stocks a wide range of comparators, including Chlorine (round), Chlorine ULR, Chlorine Dioxide, Bromine, Copper, Cyanide, Formaldehyde and Hydrogen Peroxide. For more consistent visual readings, add the Comparator Light Source (CLS). It gives you the same lighting every time, indoors or out.

2. Vacu-vials®: instrumental tests

Vacu-vials use the same self-filling principle but are made to be read in a photometer. You get a numerical result instead of a color match. That makes them a good fit for compliance records, QA programs and any setting where several operators need consistent results.

CHEMetrics V-2000 photometer
V-2000 photometer
CHEMetrics V-3000 photometer
V-3000 photometer
CHEMetrics COD photometer high range
COD photometer (HR)

Choosing a photometer

Protect your data quality with verification kits such as the V-0002 kit for the V-2000, the 530 nm SAM verification kit and the Chlorine SAM verification kit.

3. Titrets®: titration in an ampoule

Titrets bring titration to the field. A Titrettor holder lets you draw sample into the ampoule a little at a time until the color changes, then read the result from the ampoule scale. It is handy for parameters like hardness, alkalinity and sulfite, without burettes or glassware.

Don't forget the accessories and refills

Many CHEMetrics methods need an activator or accessory solution: for example, Iron Activator, Phosphate Activator, Silica Activator or DEHA Activator. Sample cups such as the 25 mL sample prep cups, MiniPet® pipettors and syringe packs keep your workflow running. Order refills before you run out. Check the kit's catalog number to match the right refill.

Which format is right for you?

Need Best fit
Quick visual field check CHEMets + comparator
Numerical results for records Vacu-vials + V-2000/V-3000 or SAM
One routine parameter, many operators Single Analyte Meter
Titration without glassware Titrets + Titrettor

Buy CHEMetrics from Ramo Trading

We carry hundreds of CHEMetrics products: kits, refills, comparators, photometers and accessories. Send us your parameter list and expected ranges through our contact page, and we'll put together the right kit and quote.

Comments (0)

Comments are reviewed before they're published.

Related articles