أكوافينيقس العلمية

The SDI test is used to determine the feed water quality for water feeding membrane filtration systems. The most common is reverse osmosis or RO system. This test method indicates the quantity of particulate matter in low turbidity (<1.0 NTU) waters. This test is...

The SDI test is used to determine the feed water quality for water feeding membrane filtration systems. The most common is reverse osmosis or RO system. This test method indicates the quantity of particulate matter in low turbidity (<1.0 NTU) waters. This test is...

# of drops x 0.5 = %NaClOOur Sodium Hypochlorite drop count test is designed to test concentrated Sodium Hypochlorite solutions in a multitude of applications. Concentration is represented in percentage. Verify the Concentration of your solution before adding it to your system. EndPoint ID...

Refill Reagents: SR2005-B

Sulfite Buret Titration Reagent Set Sulfite Reagent Set, 1 mL = 10 ppm as SO3 / 50 mL, Set Includes: 1x Potassium Iodide-Iodate 0.0125N (N/80), 500 mL, 1x Phenolphthalein Indicator, 30 mL, 1x Starch Acid Powder, 10 g All of the chemicals and reagents...

Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. 1 drop = 2 or 10 ppm as Na2SO3/ 25mL

Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. 1 drop = 6 ppm as SO3/ 25mL

EndPoint ID Sulfite Test Kit1 drop = 5 ppm as SO3/ 25 mLSulfites are used to remove dissolved oxygen from the treatment water. Excess sulfite at elevated temperature combines with oxygen to reduce pitting. Remember to cool your samples quickly and perform the test...

EndPoint ID Sulfite Test Kit1 drop = 2 or 10 ppm as Na2SO3/ 25mLSulfites are used to remove dissolved oxygen from the treatment water. Excess sulfite at elevated temperature combines with oxygen to reduce pitting. Remember to cool your samples quickly and perform the...

8.2-9.6 pH - Thymol BlueRef#: 83729

Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. 1 drop = 20 ppm as CaCO3/ 25mL

The AquaPhoenix Total Hardness Test Kit offers a fast, reliable way to measure total hardness in water samples. Using a powder indicator and simple drop-count titration (1 drop = 1 gpg as CaCO₃ per 15mL), the kit delivers clear, accurate results. Packaged in a...

Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. 1 drop = 2 or 10 ppm as CaCO3/ 25mL

1 drop = 1 gpg as CaCO3 / 15mLLiquid IndicatorEndPoint ID test kits are packaged in a durable plastic case and include all reagents, equipment and instruction card to complete approximately 60-75 tests. Color coded reagent caps match the color bar on the instruction...

Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. 1 drop = 0.5 ppm as CaCO3/ 25mLRef: 83948

Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. 1 drop = 0.5 ppm as CaCO3/ 25mL