Key takeaways
-
Intraoral cameras show patients what you see, which builds trust and treatment acceptance.
-
Direct sensors give near-instant X-ray images. PSP plates feel like film and are thin and flexible, but need a scanner.
-
Handheld X-ray adds flexibility for mobile care and multi-operatory practices, under local radiation-safety rules.
1. Intraoral cameras: the communication tool
A picture of a cracked filling or heavy calculus on the chairside monitor explains a problem better than words. Intraoral cameras help with patient education, documentation for records and insurance, and before-and-after comparisons.
What to look for
-
Image quality and autofocus for both close-up and full-arch views
-
Connectivity: USB to a PC, direct-to-monitor, wireless, or SD card
-
Ergonomics: slim head, capture button placement, a sturdy cable or reliable wireless
-
Barrier sleeves and how easy the camera is to disinfect
-
Software compatibility with your imaging or practice management system
2. Digital X-ray: sensors vs. PSP plates
|
Direct sensor (CMOS) |
PSP imaging plates |
| Image speed |
Seconds, right on screen |
Plate must be scanned after exposure |
| Patient comfort |
Rigid and thicker, with a cable or wireless module |
Thin and flexible, similar to film |
| Sizes |
Usually 1–2 sizes per sensor |
Several plate sizes, including occlusal |
| Cost profile |
Higher per sensor. Expensive if damaged |
Scanner cost up front. Plates are cheaper to replace |
| Best for |
Fast chairside workflow, endo |
Patient comfort, multiple sizes, film-like workflow |
3. Handheld X-ray units
Handheld units let you take radiographs without a wall-mounted tube head. They are useful for mobile dentistry, nursing homes, surgical suites and practices that want an imaging unit to share between operatories.
Radiation safety: X-ray equipment is regulated. Check your state, provincial or national requirements for equipment registration, operator training and shielding before you buy, and always follow ALARA ("as low as reasonably achievable").
Building your digital workflow
-
Start with the software. Make sure your sensor, scanner and camera work with your imaging software and practice management system.
-
Plan for the hardware: chairside monitors, PCs and network capacity in each operatory.
-
Add barrier sleeves and disinfection supplies for sensors and cameras.
-
Train the team on positioning, exposure settings and image storage.
-
Plan for backup. A spare sensor or PSP plates avoid downtime.
Frequently asked questions
Will a digital sensor work with my existing X-ray unit?
In most cases, yes. Sensors and PSP plates work with standard intraoral X-ray units, but exposure settings usually need to be reduced compared with film. Confirm compatibility with us before you order.
Is an intraoral camera worth it?
For most practices, yes. Showing patients images of their own teeth improves understanding and documentation, and it is one of the lowest-cost digital upgrades.
Can handheld X-ray replace a wall-mounted unit?
Some practices use handheld units as their main intraoral X-ray, while others keep them for mobile or backup use. Local regulations may affect how they can be used.
Going digital?
Tell us your current setup and software, and we'll recommend compatible cameras, sensors and X-ray units.
Request a Quote
Shop: Intraoral Cameras · Imaging Plate Scanners · Handheld X-Ray · Imaging & X-Ray · Read next: Portable Dental Systems
Comments (0)