SUBSCRIBE TO OUR NEWSLETTER
Register now to get updates on promotions and coupons.


Estimated Delivery
Jan 11 - Jan 18
Couldn't load pickup availability
Free standard shipping on orders over $50
| Feed Water Requirements*: | |
| Water Inlet | Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm) |
| Temperature | 5-45°C |
| Pressure | 1.0-4.0 Kgf/cm² |
| Flow Procedure** | PF+AC+RO+RO+AC |
| Output(25°C)**** | 1st stage RO water: 94 L/hr, 2nd stage RO water: 45 L/hr |
| Pure water outlet | 1st and 2nd stage RO water |
| DimensionLxWxH | 760x630x1190 mm |
| Weight | 80 kg |
| Standard configuration | Main body (Including 1 set of cartridges) + built-in 2 tank (40L PE tank+2 gallon pressure tank)+ accessory bag |
| Power Consumption (W) | 300 W |
| Power Supply | AC110-220 V, 50/60 Hz |
| Note | *The feed water quality will influence the pure water’s quality and cartridges life-span. **PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet, UF:ultrafiltration, TF:terminal microfiltration. ***Value of number will be influenced by temperature and feed water quality. ****All the specifications are tested under the situation:feed water’s TDS=200ppm, 25°C, 50psi and 15% recovery rate. |
| Ultrapure Water Quality: | |
| 1st stage RO water's TDS | TDS (ppm, mg/l) < TDS of tap water x 5% |
| 2nd stage RO water's conductivity | 1-5µs/cm, Organic rejection rate>99% (when MW>200 Dalton), Particles and bacteria rejection rate>99% |
Download Catalog