Boiler and Cooling Water Testing: The Essential Parameters and Test Kits
By Ramo Trading··3 min read
Boilers and cooling towers are where water treatment pays off most directly. Good control prevents scale (lost heat transfer, higher energy bills), corrosion (leaks, early equipment failure) and biological fouling. Poor control is expensive. Testing is how you know your treatment program is working.
P and M (total) alkalinity show how well the boiler is protected against corrosion and caustic attack. Phenolphthalein indicator such as Hach phenolphthalein powder pillows is used for P-alkalinity endpoints.
Oxygen scavengers
CHEMetrics DEHA comparator for oxygen-scavenger residuals
Dissolved oxygen causes pitting corrosion, so treatment programs add an oxygen scavenger and check that a residual remains. CHEMetrics offers visual tests with comparators for the common chemistries:
Rising iron or copper in condensate or feedwater is an early sign of corrosion. Test with the DR300 Iron or the CHEMetrics copper comparator.
Cooling water: what to test
Myron L 9P with titration kitPyxis ST-712 inline pH/ORP
Conductivity / TDS controls cycles of concentration and blowdown. Handheld meters from Myron L, such as the Myron L 9P with titration kit, are an industry favorite. For inline control, Sensorex conductivity sensors and transmitters are available.
A practical overview of the leading water-testing brands, what each does best, and how to build the right testing setup for drinking water, wastewater, industrial water,...
Ramo Trading has published a series of practical buying and application guides for water and wastewater testing, covering Hach, CHEMetrics, LaMotte, Palintest, IDEXX and more.
Total coliforms and E. coli are the main indicators of microbiological water safety. Compare the two most common test methods, IDEXX Colilert enzyme substrate testing and...
Comments (0)